Products › Dumpers
From a 5-gallon pail of pigment to a 16,000 lb box of scrap, hydraulic and skip hoist dumpers lift, tip and empty your containers at the push of a button.
Each dumper is designed around what you dump, where it goes and how it gets loaded, and you approve a full set of engineering drawings before it is built.
A proven manufacturing partner builds the dumper. We supply and service it, so you deal with one team.
Each skip and hold-down is designed around the exact container you dump: boxes, totes, drums, gaylords, pails or bales.
A complete set of engineering documents comes to you for approval, no matter how small the job.
Industrial-grade parts from brands like Allen-Bradley, SEW-Eurodrive, Vickers Hydraulics and SKF Bearings.
Lift & Seal dust hoods, valves, delumpers and airlocks keep product contained, clean and metered into your process.
Interlocked safety gates and enclosures, upper and lower limit switches, E-stop controls and light curtains where needed.
Every dumper is designed around the material, the container and the discharge point. Here are a few real hydraulic dumper installations and how they were built.
Powdered material fed automatically from a weigh conveyor into a ribbon blender. Lift & Seal operation contains the dust, with PLC-driven dust-tight controls.
Metal chips moved from a self-dumping hopper into a chip crusher, inside a wire mesh enclosure with a light curtain and oil-tight controls.
Casings emptied from a steel tote into rotary equipment. A vibrator aids discharge, and powered wheels on a rail serve multiple stations.
Loads from small pails up to 16,000 lb steel boxes.
Standard 45 to 60 degree dump angles, or full inversion for sticky materials.
Dump near the floor, or go high with a skip hoist up to 165 ft.
Ships fully assembled and pre-wired, with no building attachment needed.
A sealed dust hood gives dust-free, contamination-free, metered discharge.
Load by forklift, pallet jack, conveyor or AGV, and tie into your plant controls.
Both lift a loaded container and tip it out. The right one depends on how high, how heavy and how fast you need to go.
| Hydraulic Dumper | Skip Hoist Dumper | |
|---|---|---|
| Best for | Floor-level to mid-height dumping, dust-sealed discharge | High dump points, long travel, very heavy or bulk loads |
| Dump height | Typically 48 to 72 in; high-level units available | Up to 165 ft |
| Capacity | Up to 16,000 lb | Up to 30,000 lb |
| Drive | Hydraulic cylinders and power unit | Winding drum, gearmotor, wire rope or roller chain |
| Dust-free option | Lift & Seal dust hoods | Transition hoppers and chutes |
| Hydraulic Dumper | Standard | Available |
|---|---|---|
| Capacity | 200 to 7,000 lb typical | Up to 16,000 lb |
| Dump height | 48 to 72 in typical | High-level units |
| Discharge angle | 45° to 60° | Up to 180° (full inversion) |
| Cycle time | 80 sec max (low-level) | Faster speeds available |
| Hydraulics | Two 2,500 PSI min. cylinders with flow controls; integral motor and pump | — |
| Controls | NEMA 4/12 pushbutton with E-stop, upper and lower limit switches; 230/460V 3-phase, 115V control | Explosion-proof, automated / PLC |
| Construction | Welded carbon steel, machinery gray enamel | T304 stainless, food-grade or corrosion-resistant finish |
| Safety | Interlocked gate and enclosure | Light curtains, mobile bases |
All dimensions are approximate and vary by application. Skip hoist dumpers are built up to 30,000 lb and 165 ft dump height.
Fillable. Send it to sales@wizardmh.com
Repairs, inspections and upkeep
Fixes and upgrades to existing equipment
Our step-by-step quote form takes about 4 minutes. Rough answers are fine, and we follow up within 1–2 business days.
